Portable Automizer Disinfectant Fogger Machine

Features:

• Suitable for disinfection and purification of air in automobiles and indoor households 
• Smoke Output: 18000cu. Ft/min Timed Quantification. Intelligent control of liquid usage and time by the knob. 
• Spray Distance 3~5 mt It has a power protection switch when out of smoke oil, it can help to protect the machine’s using life. 
• Power Consumption 900W Voltage AC 110-240V  

Specification: 

• Packing size: 37 * 24 * 37cm 
• Disinfection time: continuous disinfection 
• Appearance color: White & Black 
• Power: 900 W 
• Warm-up time: 3 minutes 
• Weight: 3.8 KG 
• Voltage: 200V 
• Smoke output: 2000 cu. ft/min 
• Oil tank volume: 100 ml 

• Instructions For Use: 

When an indoor atomization and anti-bacterial device (atomization machine) is connected to a 220V power source, it must be allowed to warm up for three minutes before it may turn on by pressing the handle button. 

Handle operation: Press the handle button to start the atomization machine; release the handle button to stop it. 

• Working Principle: 

Indoor atomization and antimicrobial (atomization machine) The use of non-steam dry smoke to disinfect the ingredients to the car has a smell of the part. Which play a decomposition of odor, and sterilization deodorant effect. And with a scent to purify the air. 

Automatically smoke, the bike to purify the smoke for 5-8 minutes, and then open the car within 10 minutes after the smoke adsorption is completed, and then open the door to feel the healthy and fresh air. 

• Spraying Antibacterial Disinfection Machine Steps 

Step 1: Start the car, the car is on cycle, the wind speed is 3 files, the cold is open. Place the machine in the front passenger seat and open the red switch behind the machine. 

Step 2: Wait until the handle light turns on after waiting five minutes for preheating. Then switch on the timer (4 ml to 100 ml of potion). Set four or more below 80 ml, please.) 

Step 3: Spray for about 3-5 minutes, spray the chemical solution from the machine, take it out of the machine, continue internal circulation for about 15 minutes for complete absorption. Fourth step: 

Ventilate and circulate outdoors for 3 minutes. The whole structure is ready. Confirm shutdown and deliver. 

• Tips:  

Once the machine is complete, it’s best to use clear water jets. Keep machine pipes clean and unobstructed so that blockages do not affect machine operation. 

• Cleaning Function: 

Connect the machine to the power source, turn the timing knob to about two steps, press the black switch to the left cleaning position, and rinse the machine pipe with clean water or clean tap water.